![]() ![]() ![]() It’ll carry a warranty of 3 years and an endurance rating of 72 TBW across the board. The Crucial BX100 will be offered in capacities of 120GB, 250GB, 500GB, and 1TB in only the 2.5″ 7mm form factor. The BX100 will also drop several key features available to the MX series or higher SSDs such as partial power loss protection, TCG Opal 2.0, RAIN, etc. Since the Crucial BX100 is an entry level drive, performance is rated at up to 535/450 MB/s sequential reads/writes and up to 90K/70K IOPS 4K random reads/writes for the 500GB/1TB capacities and even lower performance for the smaller capacity drives. For the first time ever, Crucial will be using a Silicon Motion 2246EN controller paired with Micron’s latest 16nm 128Gb NAND. Next up is Crucial’s BX100, which is an all new SSD for Crucial aimed at the entry level/first time SSD buyer market. The Crucial MX200 is expected to be available 1Q2015. They will carry a warranty period of 3 years, and thanks to improvements in manufacturing at the 16nm node, the MX200 will carry an endurance rating of 80 TBW, 160 TBW and 320 TBW for the 250GB, 500GB, and 1TB drvies respectively. The Crucial MX200 will be offered in capacities of 250GB, 500GB, and 1TB in the 2.5″ 7mm, mSATA, and M.2 form factors. As usual it’ll also have all the features we’ve come to expect from Crucial SSDs such as partial power loss protection, RAIN, TCG Opal 2.0, etc. In order to ensure performance parity, Crucial dropped the 120GB capacity drive to ensure adequate NAND parallelism using 128Gb NAND dies. ![]() Performance wise, the Crucial MX200 will be capable of up to 555/500 MB/s sequential reads/writes and 100K/87K 4K random read/write IOPS across the board. The Crucial MX200 is mostly similar to the the Crucial MX100 in that it’ll be using a combination of Marvell’s 88SS9189 controller paired with Micron’s latest 16nm 128Gb NAND however, Crucial is adding Dynamic Write Acceleration (DWA) in the MX200, which is a dynamic write caching feature Micron first introduced with the Micron M600 SSD. But the workaround works.For CES 2015, Crucial is unveiling two new SSDs aimed directly at the entry level and mainstream markets.įirst up is the Crucial MX200, which is the successor to the Crucial MX100 unveiled back at Computex 2014. of course, as soon as CrystalDiskMark finished benchmarking, the Crucial SSD is now back in its "Firmware Error" state. In my case, I just ran CrystalDiskMark so the software could recognise there was a Crucial SSD present without a 'firmware error' (the WD HDD and Samsung SSD I had all showed as ok) and than ran the firmware update successfully while the benchmark was still going.Īnd. Keep the drive busy while updating the firmware. But reading some posts online (here and Tom's Hardware) gave the work around to what shouldn't have been an issue: Out of the box, the software is saying that the new Crucial MX500 drive I purchased had a firmware error (and hence, possibly defective). This is a ridiculous issue for the Crucial Storage Executive software to have. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |